|
|
CT60 and related things BBS
| slow performance of my CT |
|---|
|
Posted by: jury
|
Dec,31.2008-00:06
|
Hi
Another problem with my CT63 is that its soooooo slow.
For example silkcut or ocean machine demos run around 2 max 4 frames per second :(((((
When i do run nembench test i get much worse results than Radolphe gives on
his web page for 060 at 66 MHz:
http://www.czuba-tech.com/CT60/english/benchs_eng.htm
for example:
Radolphe Me
Integer multiply (16bit) 34.133 Mips 5568 % 16.5Mips 2694%
Integer divide (16bit) 3.029 Mips 836 % 3.065Mips 846%
Linear (stalled) integer 66.601 Mips 836 % 16.61Mips 208%
Interleaved (piped) integer 132.129 Mips 1659 % 16.61Mips 208%
Float multiply (64bit) 23.405 MFlops 8832 % 8.27MFlops 3122%
Float divide (64bit) 1.828 MFlops 1056 % 1.87MFlops 1086%
Linear (stalled) float 34.133 MFlops 6403 % 8.27MFlops 1552%
Interleaved (piped) float 34.133 MFlops 6416 % 8.274MFlops 1555%
32bit read (100% cache hit) 263.157 MB/s 1676 % 17MB/s 109%
32bit write (100% cache hit) 263.157 MB/s 3947 % 20MB/s 308%
Linear 32bit read 68.444 MB/s 1287 % 21.10MB/s 397%
Linear 32bit write 67.389 MB/s 1044 % 24.45MB/s 379%
Linear 32bit copy 27.025 MB/s 837 % 9,9MB/s 306%
But when I run zBench and do CPU testing I almost get the same results than XI :
http://satantronic.atari.sk/CT60/CT60_zBench2.gif
I don't know mabye I'm doing anything wrong, or mabye its something wrong with my hardware.
My config:
F030 + CT60 at 66MHz ( changing to 85 MHz makes all benches go higher but silkcut runs the same )
ST-RAM: 16MB
FAST-RAM: 256MB Infineon 133 MHz 2 CL
Could anybody have some ideas ? I want to see silkcut in real, not just on youtube :)
Thanks.
jury
"how far can they control my mind"
|
[All messages in this thread] [Start new thread]
What's the anti-troll code?
That's your personal code to be able to add comments and messages on the dhs.nu site.
Don't have a code or forgot it? Fix it here.
|
