|
|
CT60 and related things BBS
| Problems Flashing ABE |
|---|
|
Posted by: Crash
|
Apr,27.2005-06:31
|
Greetings,
I've re-configured my new JTAG cable and successfully flashed the SDR chip, but now cannot flash the ABE chip.
I have tried removing the CT60 board from the Falcon, replacing the jumper between pins 20 and 22 of the smaller Falcon board connector- but the Falcon will not boot in this state.
I do have the soldered installation for the CT60, so I am uncertain as to whether there is something in addition to this jumper that needs to be reversed before this Falcon will operate without the CT60.
I have also tried installing a 1K resistor between the pin #1 and pin #10 at ONE of the three 74LVC245A chips, and tried to program the CT60 in place on the Falcon board, although when I tried to program the ABE, I got an erase error.
Any suggestions?
|
[All messages in this thread] [Start new thread]
|
Topic
|
Posted by
|
Date
|
|
Problems Flashing ABE
|
Crash
|
Apr,27.2005-06:31
|
|
Re: Problems Flashing ABE
|
Crash
|
Apr,27.2005-06:56
|
|
Re: Problems Flashing ABE
|
Crash
|
Apr,27.2005-07:25
|
|
Re: Problems Flashing ABE
|
evil
|
Apr,27.2005-07:52
|
|
Re: Problems Flashing ABE
|
cruzito
|
Apr,28.2005-00:52
|
|
Re: Problems Flashing ABE
|
Crash
|
Apr,28.2005-07:18
|
|
Re: Problems Flashing ABE
|
Crash
|
Apr,28.2005-07:52
|
|
Re: Problems Flashing ABE
|
Coda
|
Apr,28.2005-12:59
|
|
Re: Problems Flashing ABE
|
Crash
|
Apr,28.2005-15:44
|
|
Re: Problems Flashing ABE
|
cruzito
|
Apr,29.2005-01:30
|
What's the anti-troll code?
That's your personal code to be able to add comments and messages on the dhs.nu site.
Don't have a code or forgot it? Fix it here.
|
